File Description
Operation: Read Flash [ v1.07 ]
1. Power off the device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in the device!
Wait for the device ...
Device not found!
Remove the battery and cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]
Operation: Read Flash [ v1.07 ]
1. Power off the device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in the device!
Wait for the device ...
Device Connected!
BootVersion: SPRD3
BootSource: InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed: 921600
FDL Flash: Control transferred!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
Read Flash Ok, Size: 4.00 MiB
[VERSION] GFIVE_DISCO_P1_20221219
Project Version: SC6531EFM_BAR
MMI Version: SC6531EFM_BAR
BASE Version: BASE_SVN
HW Version: SC6531EFM_BAR
12-19-2022 15:11:18
LOG Version: V1.0.1
Saved to : C:\Users\Naveed_SoftwareLAB\Desktop\GFive Disco\[VERSION] GFIVE_DISCO_P1_20221219.bin
Done!
Elapsed: 00:01:09
Reconnect Power/Cable!
Gfive Disco Flashing Requirements
- Laptop/Computer
- Data Cable
- SPD Driver
- SPD Flashing Tool
- Stock Rom Gfive Disco
How to flash Gfive Disco Mobile
- Download the Gfive Disco File link below
- unzip file
- Open the cm2scr tool or other supported
- Choose loader
- Load file
- Click start
- Press the boot key to connect mobile
- Flashing Done
- After flashing imei repair mobile back or box